Providing maintenance strategies for aircraft in Total productive maintenance method.

Document Type : Research Paper

Authors

1 national defence university

2 Associate Professor and Faculty Member of the National Defense University/tehran/iran

Abstract

In Air agencies the realization of the mission depends on the existence of aircraft and equipment that can be properly prepared at any time in accordance with the operational needs of the force and respond to the assignment mission, so maintenance and repair is doubly important. Today, a new method called Total productive maintenance to improve the quality of maintenance has been proposed, the use of which has been considered by organizations. Therefore, this research has been conducted with the aim of developing maintenance strategies for Air agencies aircrafts in the total productive maintenance method, which is presented in this article.

This Applied-Developmental has been done by field-case research method and data analysis has been done using internal and external factor matrices and SPACE diagram and advanced SWOT technique has been used to formulate the strategy. The statistical population was also experts in maintenance and repair of Air agencies.

The results are fifteen combined strategies that can be used to develop the aircraft maintenance in TPM method.

Keywords


  • منابع

    الف- فارسی

    • آذرلی، آرمان و آرمون، آرش(1398)، «مقایسه تأثیرات تحریم بر صنعت دفاعی با بخش اقتصادی و شناسایی راهبردهای موفقیت ساز صنعت دفاع»، فصلنامه مطالعات دفاعی استراتژیک، دانشگاه عالی دفاع ملی.
    • آقایی، رضا، آقایی، اصغر و ناجیزاده، محمدحسین (1394)، «شناسایی شاخص­های موثر بر تعمیرات و نگهداری چابک با رویکرد دلفی فازی »، فصلنامه مدیریت صنعتی دانشگاه تهران.
    • نهاجا، (1372)، «آیین­نامه مدیریت نگهداری, جلد یکم: اهداف، خط مشی­ها و سیاست­ها»، نشریات مرکزی نهاجا.
    • پاشایی­هولاسو، امین، دهقانی­پوده، حسین، شفقت، ابوطالب و پورصادق، ناصر (1399) «شناسایی و ارائه چارچوب مؤلفه­های نوآوری چابک در سازمان­های صنعتی دفاعی»، فصلنامه مطالعات بین رشته­ای دانش راهبردی.
    • توکلی، حسین (1384)، «تعمیر و نگهداری کل تولید»، سومین همایش ملی نگهداری، تهران
    • حاج شیر محمدی، علی (۱۳۹۳)، «برنامه ریزی نگهداری و تعمیرات» ، تهران: انتشارات غزل.
    • حسن‌آبادی، سیاوش (1393)، «طراحی الگوی راهبردی توانمندسازی کارکنان فنی سازمان منتخب»، رساله دکتری، دانشگاه عالی دفاع ملی.
    • رمضانی­دهقی، رسول(1398)، «راهبرد مناسب جهت نگهداری و تعمیر سامانه­های دفاعی»، نشریه مطالعات بین رشته­ای دانش راهبردی.
    • زیاری، مسعود و خشنود قویم، علی (1384)، «مقدمه ای بر طرح ریزی، توسعه و مدیریت موثر در برنامه قابلیت اطمینان، نگهداری و تعمیرات»، سومین کنفرانس ملی نگهداری و تعمیرات، تهران،https://civilica.com/doc/6955
    • سازمان توسعه بهره وری آمریکا (1386)، «اثربخشی کلی تجهیزات OEE»، ترجمه محمد علی متولیان، اول، تهران، رسا، صص ۸۰-۲۴۰.
    • علی احمدی، علیرضا و همکاران (1382) «نگرش جامع مدیریت استراتژیک»، تهران، انتشارات تولید دانش.
    • حاجیلو، حسینعلی و علی احمدی، علیرضا(1384)، «راهنمای تدوین استراتژی نگهداری و تعمیرات در یک واحد تولیدی»، کنفرانس ملی نگهداری و تعمیرات، دانشگاه علم وصنعت ایران.
    • فرهادیان، بابک (۱۳۸۷)، «نگاهی به نظام TPM و جایگاه شاخص OEE در نگهداری و تعمیرات» ، اصفهان: انتشارات ارکان دانش .
    • مصطفوی، مصطفی و تابان، هادی (1397)، «اهمیت و اثربخشی نگهداری و تعمیرات بهره­ور فراگیر»، فصلنامه مهندسی صنایع و مدیریت شریف.
    • معاونت برنامه ریزی و نظارت راهبردی رییس جمهور(۱۳۸۸)، «مدیریت نگهداری و تعمیرات ماشین آلات عمرانی»، نشریه شماره ۴۴.
    • ویسی، امید (139۴) «برنامه­ریزی نگهداری و تعمیرات»، انتشارات دانشگاه افسری امام علی، تهران.
    • هانگر، جی. دیوید و توماس، ال. ویلن، (1381) «مبانی مدیریت استراتژیک» ترجمه سیدمحمد اعرابی و داود ایزدی، تهران: دفتر پژوهشهای فرهنگی.

    ب- انگلیسی

    • Abdulmalek, F.A. and Rajgupal, J. (2007) "Analyzing the benets of lean manufacturing and value stream mapping via simulation: a process sector case study", International Journal of production Economics, p:236.
    • Campbell Dixon, J. (2006) "Strategies for excellence in maintenance management", Third Edition, Toronto.
    • Iwataa, Curtis, Mavrisa, Dimitri, (2013) "Object-Oriented Discrete Event Simulation Modeling Environment for Aerospace Vehicle Maintenance and Logistics Process", Georgia Institute of Technology, Atlanta, GA, 19.
    • Katila, peka. (2000) "TPM principles in the flexible manufacturing systems". Jornal of Technical Report.
    • Kedaria, V.D., Vivek, A. and Deshpande, V.A. (2014) \Implementation of total productive maintenance methodology: a review", International Journal of Emerging Technology and Advanced Engineering, p. 644-648.
    • Mobley, Keith. R, (2002) "An Introduction To Predictive Maintenance" ,2nd edition ,Elsevier Science.
    • O'Neal, T.,Min, H.,Cherobini, D. and Joo, S.-J. (2020), "Benchmarking aircraft maintenance performances using data envelopment analysis", International Journal of Quality & Reliability Management, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/IJQRM-05-2020-0157
    • Sheppard, Jill. (2005) "Bringing Lean into Maintenance", Springsteen Publishing LLC.

    COPYRIGHTS

    2025 by the authors. Published by The National Defense University. This article is an open-access article distributed under the terms and conditions of the Creative Commons Attribution 4.0 International (CC BY 4.0) https://creativecommons.org/licenses/by/4.0